 |
SIGNAL PROCESSOR FOR FLAME MONITOR SYSTEM
|
|
 |
GENERAL DESCRIPTION |
|
The
Model 800 Signal Processor, together with the Model S802 (IR) or S806 (UV)
Viewing Head provides a truly compact, programmable, single channel flame
monitoring system.
Settings can be changed from the factory defaults, by using the
available software, or by using the terminal communications
program on your computer.
Programming is accomplished by using a hand held or laptop computer
using an RS232 cable which connects to the mini jack program port located
on the front of the unit.
Multiple Signal Processors can be connected to the same RS232 bus using
a readily available Y-cable adapter. |
|
MAIN FEATURES: MODEL 800 |
| |
 |
Built in universal power supply 85 to 265VAC, 50-60Hz |
|
|
Standard DIN rail mounting |
|
|
Settings are stored in EEPROM |
|
|
Analog output |
|
|
Flame On LED Indicator |
|
|
Power, Fault and Flame Intensity LED Indicator |
|
|
Factory default settings |
|
|
Very small footprint: 1 1/2" wide x 3" High |
|
|
6 terminals wide |
|
|
2 sets of Flame On contacts |
|
|
Self Check relay contacts |
|
|
Adjustable set points via software and cable for single or multi
drop |
|
|
Self check: Once per second, both viewing head and
signal processor |
|
|
Compatible with S7xx and S8xx viewing heads |
|
|
SETUP AND OPERATION DEMO |
| |
Click to View an Online Demo
View an on-line demo of the operation of the
Model 800 in Streaming Flash format. This Demo runs in a separate
window in your browser.
You may need to install the Flash plug-in if it is not already
installed. |
|
 |
| |
|
|
|
| |
Click to Download
the PowerPoint demo
This is a high resolution full screen demo
that runs on your PC. It is suitable for projection or large screen monitors. The file size is
1.6Mb.
Choose SAVE to save the file to your hard drive.
You must have the PowerPoint 2003 viewer installed on your PC to view this
demo.
Download PowerPoint Viewer 2003 |
|
 |
|
APPROVALS: |
| The IRIS Model 800 Flame
Monitor has FM
(Factory Mutual) approval and CSA (Canadian Standards Association)
certification. |
|
SPECIFICATIONS: MODEL 800 |
|
ELECTRICAL |
Primary Input Power |
85-265VAC, 50-60 HZ, 0.10A MAX, fused (with either Viewing Head
connected) |
| |
| ENVIRONMENTAL |
Ambient Temperature |
0°C to 60°C (32°F to 140°F) |
| |
|
OUTPUTS |
Flame Relay |
2 form A contacts |
| Flame Relay Contact
Ratings |
5A at 125 VAC, 250 VAC, and 30 VDC |
| Self-Checking Relay |
1 form A contact |
| Self Checking Relay
Contact Ratings |
0.3A at 110 VDC; .5A at 125 VAC; 2A at 30VDC |
| Analog Flame Signal |
0 to 20 mA or 4 to 20
mA output for remote meters or DCS, non-isolated, 100 ohms maximum
resistance |
|
